We accept the following cards: Visa, Mastercard, Maestro, Diners Club, Discover.
We accept the following cards:
Description
Special active solvent for cleaning typical dirt and residues in the intake and throttle valve area. Dissolves and removes contaminants such as lubricants, resins, adhesives etc. Ensures the functionality of moving parts and increases the operational reliability of petrol engines.
For the intake and throttle valve area, incl. injectors and ports. Suitable only for use in petrol engines!
Application
Gain direct access to the throttle valve. Start the engine to begin cleaning.
Spray the throttle valve cleaner through the spray probe in short intervals of 2-3 seconds at 2,000 rpm over the entire throttle valve area.
If the engine cannot maintain its speed or cannot be started with the intake hose disconnected, disconnect the air mass meter plug with the ignition switched off. In this case, after cleaning, clear the stored fault from the engine control unit using a suitable diagnostic device and re-teach the air mass meter if necessary.
If the engine speed fluctuates by more than 1,000 rpm during application, it is important to shorten the spray intervals. Note that the throttle valve cleaner must not come into contact with the air mass meter or painted components.
For stubborn deposits on the throttle valve, intake manifold or intake valves, you can repeat the cleaning with a second can. After application, let the engine run for about 20 sec. at min. 2,000 rpm to burn off any residual quantities in the intake system.
IRIS
